PHOENIX STANDARDS
Most suppliers inspect after a complaint.
We inspect before the board moves.
Every board entering and leaving the facility passes through a defined, documented quality process conducted a minimum of three times daily.
MDF Interior / Exterior
The foundation of clean, consistent furniture surfaces.
A fine, uniform fibre panel engineered for consistent surface quality, interior grade for dry spaces, exterior grade for humid & moisture-prone environments.
Density
650-850kg/m3
Internal bond
> 0.60N/mm2
moisture
5-11%
screw holding
Consistent Across Panel
Particle Board
Stable, flat, and built for precision laminate work.
A cost-efficient compressed wood panel that delivers a flat, stable surfaces, best suited for dry indoor furniture production and laminate application.
Density
620–720 kg/m³
Internal bond
≥ 0.35 N/mm²
moisture
8–12%
screw holding
Moderate / Confirmat
HWDR Boards
HWDR
The foundation of clean, consistent furniture surfaces.
A high-density, water-resistant board treated with specialized resins that significantly reduce moisture absorption engineered for demanding interiors.
Density
780–850 kg/m³
Internal bond
≥ 0.60 N/mm²
moisture
6–9%
screw holding
High pull-out resistance
Paper Standards
Two ranges.
One non-negotiable standard.
DuraLam Paper.
Indian Décor
65-70
GSM.
Essential
Colors
Production-grade décor. Batch-stable. Indian-made.
Opulum Paper.
Imported Décor
70 - 110
GSM.
Designer
Shades
Premium imports for premium projects.
MELAMINE COATED PAPERS
Quality begins with the paper, not the press.
Phoenix produces its own 100% melamine-coated decor paper within the facility, including resin chemistry, saturation, and final paper processing.
10 step testing process
Boiling Test
2-hour submersion in boiling water. Zero swelling or delamination accepted.
Screw Test
Face and edge wood-screw pull-out resistance per EN-317.
UV Testing
6-stage UV resistance check for gloss retention and anti-yellowing. Velvet Series only.
Anti-Peeling Test
100-square cross-cut grid with standardized 90° tape tension.
Stain Test
Chemical reagent exposure to verify stain resistance on the finish.
Boiling Test
2-hour submersion in boiling water. Zero swelling or delamination accepted.
Screw Test
Face and edge wood-screw pull-out resistance per EN-317.
UV Testing
6-stage UV resistance check for gloss retention and anti-yellowing. Velvet Series only.
Anti-Peeling Test
100-square cross-cut grid with standardized 90° tape tension.
Stain Test
Chemical reagent exposure to verify stain resistance on the finish.
DensityTest
Mass and volume double-verification for structural strength.
abrasion Testing
Surface wear measurement under controlled abrasive load.
Chipping test
Edge behaviour under saw and router cut conditions.
scratch Test
Pencil hardness scratch resistance, 3H–6H by product line.
Color test
Chemical reagent exposure to verify stain resistance on the finish.
DensityTest
Mass and volume double-verification for structural strength.
abrasion Testing
Surface wear measurement under controlled abrasive load.
Chipping test
Edge behaviour under saw and router cut conditions.
scratch Test
Pencil hardness scratch resistance, 3H–6H by product line.
Color test
Chemical reagent exposure to verify stain resistance on the finish.
Rooted in Indian manufacturing since 1950 and purpose-built for what the industry needs today.
Products
Velvet SeriesLucent AcrylicPhoenix EdgePre-Laminated Panels
Company
About UsFacilitiesDealingsStandards
Resources
CatalougesCare Guide
Get in touch
hello@phoenixsurface.com
+91 80035 91308
©2026 Copyright by Phoenix Surface Solutions
Terms and Conditions
|
Privacy Policy